Formwork Systems



Hand-Set Wall Formwork /Aluminium Formwork

AluFix the Triple Genius

The light-weight, aluminium wall formwork system AluFix is the leading equipment for quality-conscious contractors.

AluFix aluminium formwork it‘s atriple genius because it‘s

  • lightweight and crane-independent
  • flexible by offering 3 heights (132 cm, 264 cm and 300 cm)
  • state of the art technology

State of the art technology:

With its closed and powdercoated aluminium profiles and its allplastic facing alkus with a 7 year longterm guarantee, AluFix is the star in the league of lightweight hand-set formwork systems. When crane time is not available and working space limited, AluFix helps achieve highquality results in different constructions areas, e.g. with

  • residential construction
  • commercial building
  • civil engineering projects
  • public and infrastructure projects
  • garden and landscape projects

100% wood-free, all-plastic facing alkus

MEVA is the first formwork manufacturer to equip all its formwork systems with the pioneering all-plastic forming face “alkus“. Thus, all MEVA formwork systems produce a consistent high-quality concrete finish.

Elements AluFix

  • 3 panel heights: 132, 264 and 300 cm; panel widths from 20 to 75 cm
  1. Total flexibility in detailing for any job
  2. Minimum filler areas
  3. Easy adaptation to building layout
  • 90° inner and outer corner; continuously adjustable 80°–180° articulated corner
  1. Form any corner using panel system
  • Largest panel 270/75 with all-plastic facing weighs just on 50 kg
  1. True hand-set system

Load capacity AluFix

  • permissible concrete load capacity according to the German standard DIN 18218 is 55 kN/m²
  1. pour to panel height at any pouring rate
  2. applies to all concrete mixtures, climatic conditions
  3. large safety corridor for faster, higher pours 

Frame AluFix

  • Frame made of closed, 2 chamber hollow aluminium frame
  1. exceptional sturdiness, robust and strong
  • annealed scratch and knock protection coating 
  1. faster cleaning
  2. less concrete adhesion
  • easy-to-grip profiles
  1. safe, comfortable handling of panels even when wet

Multifunction profile AluFix



  • Unique MEVA multi-function profile with welded-in nuts (Dywidag thread)
  1. fast, simple and safe attachment of all accessory parts such as scaffolding brackets, alignment rails or braces
  2. no assembly errors

Tie-holes and clamp AluFix



  • Tie hole with conical aluminium sleeve, welded in at both sides
  1. Easy, safe use of DW 15 tie rods
  2. robust and durable
  • Tie holes: 3 for 300 and 164 cm panel height; 2 for  132 cm panel height
  1. perfect balance between sturdiness, leight weight and high load capacity
  • Safe connection of panels with assembly lock (clamp), weighs only 0,8 kg
  1. Joins and aligns with just a few hammer blows
  2. Fits anywhere on the frame, easy alignment of panels on uneven ground with minimum filler areas
  3. Saving time and money: no consumable, but rentable
  4. No losable parts, the lightest of its kind

All-plastic facing alkus

  • No swelling or shrinking caused by moisture penetration
  1. No change in dimensions due to moisture; no rotting or fungal decay; durable
  2. Built in flush with panel frame; improved and consistently even concrete surfaces during the whole lifespan
  • Easy repair of scratches or drill holes etc. on-site with the same polypropylene material
  1. No downtimes through repairs
  2. Permanent availability of panels
  • Screwable and nailable without chipping off of top layer
  1. Can be treated like plywood
  • alkus is as durable as the panel frame
  1. No re-facing required; no disruption of construction process by downtimes

AF panels

AF panelsZoom
Construction height 10 cm, frame profile width 23 mm. Three tie holes per panel height 264 cm and 300 cm. The frames of the AF panels are made of closed 3-chamber aluminium profiles (double groove) or 2-chamber aluminium profiles (single groove) and are torsion-proof. They are easy to clean thanks to their high-quality annealed powder coating. The AF panels are equipped with an alkus AL 13 all-plastic facing. All-around grooves and EA assembly locks (double groove) or E assembly locks (single groove) guarantee a tight and perfectly aligned panel connection. Anchor sleeves are weld into the frames. Multi-function profiles allow for an easy, fast and safe attachment of accessories.

AF special panels

AF special panelsZoom
Made to order, delivery time to be agreed.

AF slab formwork

AF slab formworkZoom
AluFix slab formwork

AF radius panels

AF radius panelsZoom
Steel construction with steel sheeting. Primed and cavity-sealed. Allows the AF formwork to be used as polygonal formwork.

AF tensioning bow

AF tensioning bowZoom
Takes up the anchor load when forming polygonal constructions with radius panels.

AF inside corner Alu(minium)

AF inside corner Alu(minium)Zoom
Aluminium. With annealead power coating. For 90° corners, side length 20 cm.

AF outside corner Alu(minium)

AF outside corner Alu(minium)Zoom
Aluminium. With annealed powder coating. Provides a tight outside corner assembly for 90° angles when used together with AF panels and EA assembly locks (double groove) or E assembly locks (single groove).

AF hinged inside corner

AF hinged inside cornerZoom
Steel construction with steel sheeting. Primed and cavity-sealed. Side length 20 cm. Adjustable angle 80°–180° when used as inside corner, or 95°–180° when used as outside corner.

AF hinged outside corner

AF hinged outside cornerZoom
Steel construction with steel sheeting. Primed and cavity-sealed. Side length 1,5 cm. Adjustable angle 0°–120°.

AF stripping corner

AF stripping cornerZoom
Aluminium, 3 parts. With annealed powder coating and tie holes. When assembling and stripping the formwork, the AF stripping corners are pressed against and removed from the concrete by using the integrated spanner.

Adhesive tape, red

Adhesive tape, red
Not shown. Reinforced adhesive tape, red, 50 mm wide, 50 running metres. Total thickness: 270 mµ. Natural rubber adhesive on one side. PE-coated.

Assembly lock

Assembly lockZoom
Galvanized. Tightly connects and aligns AluFix and EcoAs panels. Clamping length 4,6 cm. Three assembly locks are required per panel joint for a panel height of 3,00 m and two assembly locks per panel joint for a panel height of 2,64 m or 1,32 m.

Uni-assembly lock

Uni-assembly lockZoom
Galvanized. For stepless compensation. Clamping length 22 cm or 28 cm.

E-assembly lock with coupling

E-assembly lock with couplingZoom
Galvanized. Is used to attach push-pull props at the AluFix and EcoAs panel joints. Clamping length 4,6 cm.

Flange screw

Flange screwZoom
Galvanized. DW thread Ø 15 mm. Is used to attach accessories, e.g. alignment rails, brace frames, push-pull props, etc. Length of thread 18 cm or 27 cm.

AF compensation profile

AF compensation profileZoom
Steel frame profile with angles. Primed and cavity-sealed. Is clamped to the AF panel with two E assembly locks and used for job­built fillers consisting of short squared timber and a facing. Delivery and weight by pairs.

AS alignment rail

AS alignment railZoom
Galvanized. Is used to brace panel joints for crane ganging, bridge problem areas, brace compensation areas and build stop ends with stop end fixtures. Is attached to the formwork with flange screws.

Corner angle 40/60

Corner angle 40/60Zoom
Galvanized. Side lengths 40 cm and 60 cm. For inside and outside corners and column formwork.

Plug D20, red

Plug D20, redZoom
Red. Is used to close unused tie holes (AluFix, EcoAs, AluStar and StarTec).

Articulated flange nut 15/120

Articulated flange nut 15/120Zoom
Forged, galvanized. DIN 18218. DW thread Ø 15 mm, plate Ø 120 mm, max. inclination 10°, SW 27. Max. load capacity 90 kN. Reduces wear of panel coating.

Spanner SW 27

Spanner SW 27Zoom
Inset yellow chromated. Spanner width (SW) 27 mm. Is used to tighten and loosen flange nuts 100, articulated flange nuts 15/120 and flange screws.

Drive nut 60

Drive nut 60Zoom
Galvanized. DW thread Ø 15 mm, plate Ø 60 mm. Adm. load capacity 90 kN (DIN 18216). Is used to tie the formwork to the ground or to a wall connection.

Tie rod DW 15/90

Tie rod DW 15/90Zoom
Uncoated, not weldable. DW thread Ø 15 mm. Adm. load capacity 90 kN (DIN 18216). Is used to tie panels of a double­sided formwork.

Tie claw 23

Tie claw 23Zoom
Galvanized. Permits tieing (with tie rod DW 15 and flange nut 100) directly above or beside EcoAs and AluFix panels.

Push-pull strut

Push-pull strutZoom
Galvanized, is attached above a panel joint, replaces the top tie for panels which are assembled in horizontal position. Applicable for wall (foundation) thickness up to 64 cm (AluFix and EcoAs) and 60 cm (StarTec and AluStar).

Crane hooks

Crane hooksZoom
Coated. Is used to move and crane­gang AluFix and EcoAs panels. Self-locking. Load capacity 6 kN (600 kg). Always two crane hooks required per gang. Refer to the crane hook Operating Instructions for application and safety test.

Transport angle

Transport angleZoom
Is used to stack and transport 5 to 12 EcoAs or AluFix panels. Distance between holes 10 cm. We recommend using 2 foldable angles and 2 angles of the rigid type per stack. Max. load capacity is 10 kN per angle. For safety reasons consider 20 kN as maximum capacity for the whole stack.

AS/ST safety bolt, black

AS/ST safety bolt, blackZoom
Plastic, black. Secures stacked AluFix, Ecos, AluStar and StarTec panels.

Scaffolding bracket

Scaffolding bracketZoom
Galvanized, yellow, pluggable. Is used as working and safety scaffold. Is attached to the multi-function profile and secured to the multi-function profile below with a flange screw 18. The planking can be mounted to the brackets. Working width approx. 90 or 125 cm. MEVA Guard-railing post is also required. Bracket spacing depends on type of planking (DIN 4420).

Side railing

Side railingZoom
Galvanized. Is plugged into the scaffolding bracket.

Guard-railing post

Guard-railing postZoom
Galvanized. Is plugged into the scaffolding bracket.

Guard-railing post 48/120 UK

Guard-railing post 48/120 UKZoom
Galvanized. With manifold to be plugged into the scaffolding bracket and with 48 mm Ø tube to attach scaffold couplers.

Support 800 guard-railing post

Support 800 guard-railing postZoom
Galvanized. For the side protection at all MEVA wall formwork systems. Allows the extension for guard­railing KLK 230 and all MEVA guard­railing posts to be plugged in. Guard­railing posts and flange screws 18 must be ordered separately.

Scaffold tube

Scaffold tubeZoom
Galvanized. Is used as hand­rail / mid­rail in combination with guard­railing post 48/120 UK.

Swivel-joint coupler 48/48

Swivel-joint coupler 48/48Zoom
Galvanized. Connects 2 scaffold tubes with Ø 48,3 mm at any angle required.

Brace frame 250

Brace frame 250Zoom
Galvanized. Aligns and braces the formwork. Available with or without formwork­prop connector. Consists of a push­pull prop R 250 (190–320 cm), a brace SRL 120 (90–150 cm) and a double­jointed footplate. The formwork­prop connectors are attached to the formwork with flange screws 18.

Formwork-prop connector

Formwork-prop connectorZoom
Galvanized. Connects braces, brace frames and push­pull props (max. Ø 48 mm) to the multi­function profile with a flange screw 18. Delivery includes head bolt 16/90 and cotter pin 4.

Foundation tape

Foundation tapeZoom
Galvanized. Hole spacing 50 mm, hole Ø 16 mm, length 50 m. Adm. tractive force 10 kN. To be cut at hole center. Together with the appropriate tensioner it serves as bottom tie when panels are assembled in horizontal position.

Tensioner EA for foundation tape

Tensioner EA for foundation tapeZoom
Galvanized. Connects the foundation tape to EcoAs or AluFix­panels and serves as bottom tie when panels are assembled in horizontal position. Two tensioners are required per tieing position.

Trolley for foundation tape

Trolley for foundation tape
Not shown. Galvanized. Is used to transport and cut foundation tape to length. Suitable for one roll. Pneumatic wheels.
 © MEVA Schalungs-Systeme GmbH